Motorola BLINK1 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola BLINK1. Motorola BLINK1 23 pagina's. Wi-fi
Ook voor Motorola BLINK1: Gebruikershandleiding (26 pagina's), Gebruikershandleiding (25 pagina's), Gebruikershandleiding (46 pagina's)

Pagina afdrukken

What is the significance of LED

blinking?

I am not able to access my

camera.

During setup on device for An-

droid™ and iOS, during the last

step I am not able to find my

camera and the setup fails.

BLINK1_EU_A6_v9_2012_12_24.indd 34-35

A blinking LED indicates the following

status:

Fast blinking: Your camera is in setup

mode. You can add the camera to

your account in this mode. Out of the

box, the camera is in setup mode. To

reset to setup mode, press and hold

the RESET button on the bottom of

the camera untill you hear a long

beep.

Slow blinking: The camera is either

connecting to the router or lost the

link to the router. Please ensure that

the camera is in the Wi-Fi signal

range. In a typical home scenario,

the range is about 80-100feet

LED is stable: The camera is

connected to the Wi-Fi network.

Please check if the camera is within

Wi-Fi range. If the LED on your

camera is slow blinking, please try to

move the camera closer to the router

for better Wi-Fi range and try again.

Please reset the camera to setup

mode and try again. Press and hold

the RESET button on the bottom

of the camera untill you hear a

long beep. Wait for a minute for the

camera to restart. The camera LED

is blinking fast, indicating that it is in

setup mode.

Help

Even though I am accessing

my camera from the same

Wi-Fi network, I still find my

camera is shown as remote. I

can only access it for 5 minutes

at a time.

When I try to view the camera,

I get a prompt for camera

firmware upgrade. What should

I do ?

I am not able to find the iOS

SM.

application in the App Store

Which platforms are supported

for accessing my camera?

I do not hear the sound when

I am accessing a remote

camera.

Help

Please check your wireless router

settings. In routers like Buffalo there

is an option called Wireless Isolation.

Please disable this option.

Please upgrade your firmware. This

takes around 5 minutes. We push up-

grades from time to time to improve

the camera features.

This is a known issue for some users

using iOS version 6.0.1. Please

use the following link on your iPad

browser to download the application.

https://itunes.apple.com/us/

app/monitor-everywhere/

id577753318?mt=8&uo=4

Android™ OS version 2.3.6 or above

iOS version 4.3 or above

Windows® XP SP3 or above

Internet Explorer®

Chrome™

MAC OS®

Safari®

You can tap on the speaker icon

in the video stream screen to hear

audio. By default the audio is not ON

when you are accessing a remote

camera.

24/12/2012 11:19 AM