Motorola ASTRO 25 Gebruikershandleiding - Pagina 28

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola ASTRO 25. Motorola ASTRO 25 36 pagina's. Enhanced single band mobile radio
Ook voor Motorola ASTRO 25: Installatiehandleiding (25 pagina's)

Pagina afdrukken

USB Related Errors

The currently selected

FLASHport Upgrade file

cannot be used for USB

FLASHport.

Error validating Flash RAM

Downloader in upgrade file

Failed to install Motorola

XTS FLASHzap Device.

Please reset your radio.

UCM Upgrade Errors

Radio contains a Type I

Encryption Module. Unable

to upgrade this module type.

Invalid UCM Upgrade File

FLASHport User's Guide

Troubleshooting Hints

Possible Corrective Actions

This error may be due to software upgrade kit

version. To be able to use USB communications

in FLASHport, the bootcode software in the

upgrade kit must be of at least a specific version

or higher. This error appears if the version of the

bootcode in the upgrade kit is older than what is

needed for USB.

This error may be due to software upgrade kit

version. To be able to use USB communications

in FLASHport, the bootcode software in the

upgrade kit must be of at least a specific version

or higher. This error specifies that CPS was

unable for some reason to do that verification.

Retry the upgrade.

This error will occur if the FLASHzap Device

was not installed correctly (this is not a CPS

installation issue). The FLASHzap device is

installed when USB is to be used for the first

time for FLASHport upgrades in the specific

machine. The installation of the device occurs

automatically when the radio is put in bootmode

and while connected through USB.

Possible Corrective Actions

This error can be caused if the UCM in the radio

is a Type I UCM module. The CPS is unable to

upgrade it. UCM must be upgraded using other

equipment available for type I modules

This is an error of the UCM upgrade file. The for-

mat and/or contents of the file are not valid. Ver-

ify that the correct UCM upgrade file has been

selected. If so, the file may be corrupt or invalid

so a new file will be needed to complete the

UCM upgrade.