Motorola ASTRO 25 Gebruikershandleiding - Pagina 30
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola ASTRO 25. Motorola ASTRO 25 36 pagina's. Enhanced single band mobile radio
Ook voor Motorola ASTRO 25: Installatiehandleiding (25 pagina's)
Pagina afdrukken
Unpack Codeplug Error -
Upgrade Aborted
Unable to Pack Codeplug -
Upgrade Aborted
This Radio is not supported
by this application
Flash Not Performed - Radio
Already Upgraded
Codeplug Upgrade Failed.
FLASH Unknown Failure
26
FLASHport User's Guide
Troubleshooting Hints
This is an error that occurred while trying to
unpack the codeplug. From the CPS menubar,
read the radio (File->Read Device) to see if an
error occurs. If an error occurs, then there is
something wrong with the codeplug. If an error
does not occur, attempt the upgrade again.
This is an error that occurred while trying to pack
the codeplug. From the CPS try to read and
write the radio to see if there are any problems
with the codeplug. If an error occurs, then there
is something wrong with the codeplug. If an
error does not occur, attempt the upgrade again.
The radio connected is not supported by the
CPS application. Verify that the correct CPS is
being used to upgrade the radio.
This error only occurs in releases of CPS older
than R05.00.00. This error indicates that the
radio connected to the PC has already been
upgraded with the attached FLASHkey. A new
FLASHkey is needed to upgrade this radio.
This error indicates that the was unable to
upgrade the codeplug. There could be many
reasons why this happens:
•
The model number of the radio cannot be
found in the hopt.mdf file.
•
The FLASHcode is invalid.
•
An Enhancement Option is not found in the
hopt.mdf file or it is not supported by the
particular radio model.
This is a generic error for unknown error condi-
tions. Most likely a communication problem
occurred. Check for loose cables and retry the
upgrade. If the problem persists, try using a dif-
ferent cable or computer.