Motorola ASTRO 25 User Manual - Page 30

Browse online or download pdf User Manual for Radio Motorola ASTRO 25. Motorola ASTRO 25 36 pages. Enhanced single band mobile radio
Also for Motorola ASTRO 25: Installation Manual (25 pages)

Print Page

Unpack Codeplug Error -

Upgrade Aborted

Unable to Pack Codeplug -

Upgrade Aborted

This Radio is not supported

by this application

Flash Not Performed - Radio

Already Upgraded

Codeplug Upgrade Failed.

FLASH Unknown Failure

FLASHport User's Guide

Troubleshooting Hints

This is an error that occurred while trying to

unpack the codeplug. From the CPS menubar,

read the radio (File->Read Device) to see if an

error occurs. If an error occurs, then there is

something wrong with the codeplug. If an error

does not occur, attempt the upgrade again.

This is an error that occurred while trying to pack

the codeplug. From the CPS try to read and

write the radio to see if there are any problems

with the codeplug. If an error occurs, then there

is something wrong with the codeplug. If an

error does not occur, attempt the upgrade again.

The radio connected is not supported by the

CPS application. Verify that the correct CPS is

being used to upgrade the radio.

This error only occurs in releases of CPS older

than R05.00.00. This error indicates that the

radio connected to the PC has already been

upgraded with the attached FLASHkey. A new

FLASHkey is needed to upgrade this radio.

This error indicates that the was unable to

upgrade the codeplug. There could be many

reasons why this happens:

•

The model number of the radio cannot be

found in the hopt.mdf file.

•

The FLASHcode is invalid.

•

An Enhancement Option is not found in the

hopt.mdf file or it is not supported by the

particular radio model.

This is a generic error for unknown error condi-

tions. Most likely a communication problem

occurred. Check for loose cables and retry the

upgrade. If the problem persists, try using a dif-

ferent cable or computer.