Epson TM-T88V Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Epson TM-T88V. Epson TM-T88V 4 pagina's. Pos printer
Ook voor Epson TM-T88V: Specificaties (8 pagina's), Brochure & specificaties (8 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (19 pagina's), Installatie-instructie (2 pagina's), Handmatig (10 pagina's)

Pagina afdrukken

Notes on Usage

Timing of cutting off connection

If data transfer from an application of the host has already been completed, data might

remain in the printer internal buffer. As such data remaining in the buffer might be lost

when the connection is cut off, use the status and similar functions to check that transmitted

data has been completely printed when printing or cutting off the wireless connection.

Setting the Printer

When using this printer, setting ON the DIP switch 2-8.

Notes on Using with iOS-equipped Devices

Note the following points when using this product with iOS-equipped devices.

Depending on the iOS specifications, print data may be deleted if it is sent while the printer

is not ready to print.

The printer is unable to print in cases such as

•

when the roll paper cover is open.

•

when the paper is out.

Communication Specifications

❏

Conforms to Bluetooth Specification Version 2.1+EDR

❏

Equipped with the Serial Port Profile (SPP)

❏

Equipped with the iAP protocol

❏

Bluetooth Power Class 2 model

❏

Built-in antenna

Part Names of the Interface board

Push button

The Push button has the following functions.

❏

Status Sheet Printing

Turn on the printer, wait for about 7 seconds.

Keep pressing the Push button on the interface board for more than 3 seconds.The

printer starts printing the settings for the interface board and the information of

software version.

You can check all the information required for the Bluetooth connection (BD_ADDR,

PassKey, DeviceName) by this status sheet.

❏

Initialize wireless communication settings

Turn off the printer.

While pressing the Push button on the interface board, turn on the printer. (Keep

pressing the button until the printer starts printing wireless communication

setting sheet.)

USB port for Printer Setting

Check operation LED