Epson TM-T88V Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Изготовитель этикеток Epson TM-T88V. Epson TM-T88V 4 страницы. Pos printer
Также для Epson TM-T88V: Технические характеристики (8 страниц), Брошюра и технические характеристики (8 страниц), Технические характеристики (2 страниц), Руководство пользователя (19 страниц), Инструкция по настройке (2 страниц), Руководство (10 страниц)

Печатать страницу
Epson TM-T88V Руководство
Notes on Usage
Timing of cutting off connection
If data transfer from an application of the host has already been completed, data might
remain in the printer internal buffer. As such data remaining in the buffer might be lost
when the connection is cut off, use the status and similar functions to check that transmitted
data has been completely printed when printing or cutting off the wireless connection.
Setting the Printer
When using this printer, setting ON the DIP switch 2-8.
Notes on Using with iOS-equipped Devices
Note the following points when using this product with iOS-equipped devices.
Depending on the iOS specifications, print data may be deleted if it is sent while the printer
is not ready to print.
The printer is unable to print in cases such as
•
when the roll paper cover is open.
•
when the paper is out.
Communication Specifications
❏
Conforms to Bluetooth Specification Version 2.1+EDR
❏
Equipped with the Serial Port Profile (SPP)
❏
Equipped with the iAP protocol
❏
Bluetooth Power Class 2 model
❏
Built-in antenna
Part Names of the Interface board
Push button
Push button
The Push button has the following functions.
❏
Status Sheet Printing
1.
Turn on the printer, wait for about 7 seconds.
2.
Keep pressing the Push button on the interface board for more than 3 seconds.The
printer starts printing the settings for the interface board and the information of
software version.
You can check all the information required for the Bluetooth connection (BD_ADDR,
PassKey, DeviceName) by this status sheet.
❏
Initialize wireless communication settings
1.
Turn off the printer.
2.
While pressing the Push button on the interface board, turn on the printer. (Keep
pressing the button until the printer starts printing wireless communication
setting sheet.)
USB port for Printer Setting
Check operation LED
3