Epson 755c - PowerLite XGA LCD Projector Bedieningshandleiding - Pagina 11

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 36 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 755c - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Specificatieblad (2 pagina's), Onderdelen (26 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Door gebruiker vervangbare onderdelen (1 pagina's), Snelle installatie (2 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Registering and deleting projectors for monitoring

To end the registration operation, click the

top-right corner of the window or click [Cancel].

The icon(s) of the projector(s) you registered will be displayed

in "Grouping view" or "Detail list view".

Refer to "Monitoring window layout" for details on using the

"Grouping view" and "Detail list view".

Setting the range of addresses to do an automatic

search and registration

TIP

Projectors that are using a serial

cannot be detected.

PROCEDURE

Right-click in "Grouping view" and select "New" -

"Projector (automatic search)".

The "Create new projector (automatic registration)" window

will be displayed.

• If "Detail list view" is displayed, select "New" - "Projector

(automatic search)" from the "Edit" menu.

in the

p.17

⇔

TCP/IP conversion adapter

Select the "Specify an address range and search"

check box and then enter the starting address and

ending address in the range.

Click [Search].

Automatic searching will be carried out, and the names of the

projectors that have been detected will be displayed.