Epson 835p - PowerLite XGA LCD Projector Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 19 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 835p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (4 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Aanvullende handleiding (1 pagina's), Brochure & specificaties (4 pagina's), Productinformatie (21 pagina's), Gebruikershandleiding (1 pagina's), Technisch overzicht (7 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Specificatieblad (4 pagina's)

Epson 835p - PowerLite XGA LCD Projector Installatiehandleiding
ELPMBUNI

Parts List

NOTE:
This mount is shipped with all proper installation hardware and components. Make sure that none of
these parts are missing and/or damaged before beginning installation. If there are parts missing
and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700).
Upper Assembly
(Qty 1)
Plastic Barrel Caps
(Qty 4)
Lag Screws
(#14 x 2")
(Qty 3)
M3 x 16mm
Phillips Head
Screws (Qty 4)

Installation Tools

Phillips Head Screw Driver
Soft Material/ Blanket
Allen Wrench (Supplied)
Tape Measure
Ladder
NOTE:
Mounting screws will vary by projector. Please see the following pages for model specific hardware:
Pages 10, 11, 12, and 13.
Installation Manual
Mounting Bracket
(Qty 1)
M3 Flat Washers
(Qty 4)
Note: Must be used
with the M3 x 16
Phillips screws.
M4 x 12 Security
Head Screws
(Qty 4)
NOTE: The following hardware is included in the hardware
pack but is not required for the installation.
M5 x 12mm Security Head Screws (Qty 4)
M6 x 12mm Security Head Screws (Qty 4)
Portable Drill
Pencil
Level (Supplied)
Stud Finder (Commercially Available)
M5 Allen Wrench
Page - 5 -