Toshiba ASYG14LMCB Bedieningshandleiding - Pagina 5

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Toshiba ASYG14LMCB. Toshiba ASYG14LMCB 48 pagina's.

Pagina afdrukken

Timer Operation

Note for timer settings:

Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock go wrong.

In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.

ON timer or OFF timer

Turn on the indoor unit by pressing the START/STOP button.

OPERATION indicator on the indoor unit turns on.

If the indoor unit is already operating, skip this step.

Press the ON timer button or the OFF timer button.

Clock indicator on the remote controller display starts blinking,

and TIMER indicator on the indoor unit turns on.

Adjust the time by pressing the SELECT button within about 5

seconds, while the clock indicator is blinking.

(About 5 seconds later, the remote controller display returns to

standby screen.)

To cancel the timer and return to the normal operation, press the

CANCEL button.

To redo the timer setting, perform step 2 and 3.

Program timer (combined use of the ON timer and the OFF timer)

You can set an integrated ON–OFF or OFF–ON timer.

Either of the timer whose conﬁ gured starting time is closer to the

current time works ﬁ rst, and the order of timer operation is displayed

as follows:

Timer

ON–OFF timer

OFF–ON timer

The timer that is set later starts counting down after the counting

down of the preceding timer is ﬁ nished.

General Informations on Operation

Automatic defrosting operation

When outdoor temperature is very low with high humidity, frost

may form on the outdoor unit during the heating operation, and

it could reduce the operating performance of the product.

For frost protection, a microcomputer-controlled automatic

defrost function is equipped in this air conditioner.

If frost forms, the air conditioner will temporarily stop, and

defrost circuit will operate brieﬂ y (maximum of 15 minutes.)

OPERATION indicator on the indoor unit blinks during this

operation.

If frost forms on the outdoor unit after the heating operation, the

outdoor unit will stop automatically after it operates for a few

minutes. Then the automatic defrosting operation starts.

Auto-restart function

In event of power interruption such as a blackout, the air

conditioner stops once. But it restarts automatically and

performs previous operation when the power supply is resumed.

If any power interruption occurs after the timer is set, counting

down of the timer will be reset.

After the power supply is resumed, the TIMER indicator on the

indoor unit blinks to notify you that there has been a timer fault.

In such a case, reset the timer for your opportune time.

Malfunctions caused by other electrical devices:

Use of other electrical appliances such as an electric shaver or

nearby use of a wireless radio transmitter may cause the malfunction

of the air conditioner.

If you encounter such a malfunction, turn off the circuit breaker once.

Then turn it on again, and resume operation by using the remote

controller.

9333003061_OM.indb 5

Indicator on remote controller display

AIR CONDITIONER Wall Mounted Type

Notes:

• If you change the setting value for the timer after the program timer

is set, the counting down of the timer will be reset at that moment.

• Time setting for each combination should be within a span of 24 hours.

SLEEP timer

Press the SLEEP timer button to activate the SLEEP timer.

OPERATION indicator and TIMER indicator on the indoor unit

turns on.

Adjust the time by pressing the SELECT button within about 5

seconds, while the clock indicator is blinking.

(About 5 seconds later, the remote controller display returns to

standby screen.)

Each time you press the button, the time changes as follows:

0.5

1.0

2.0

(30 min.)

To repeat the timer, press the SLEEP timer button when

indicator is not displayed on the remote controller display.

To help you to fall asleep comfortably and prevent excessive warming

or cooling in sleep, the SLEEP timer controls the temperature setting

automatically in accordance with the set time shown as follows. The

air conditioner completely turns off after the set time has elapsed.

In HEAT mode

1 °C 2 °C 3 °C 4 °C

Set

30 min.

temperature

1 hour

1.5 hour

Set time

OPERATING MANUAL

3.0

5.0

7.0

9.0

hours

In COOL or DRY mode

Set time

1 hour

1 °C

2 °C

En-5

20/09/2013 10:10:13