MSI 610BF Handmatig - Pagina 30

Blader online of download pdf Handmatig voor {categorie_naam} MSI 610BF. MSI 610BF 45 pagina's.

Pagina afdrukken
PnP OS Installed
Reset Configuration Data
Resources Controlled By
 IRQ Resources
 DMA Resources
 Memory Resources
PCI/VGA Palette Snoop
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values
 PNP OS Installed: This item allows you to determine install PnP OS or not.
The choice: Yes, No.
Reset Configuration Data: Normally, you leave this field Disabled. Select Enabled to
reset Extended System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system reconfiguration has caused such a serious conflict
that the operating system can not boot.
The choice: Enabled, Disabled .
Resource controlled by: The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and Play compatible devices. However,
this capability means absolutely nothing unless you are using a Plug and Play operating
system such as Windows95. If you set this field to "manual" choose specific resources
by going into each of the sub menu that follows this field (a sub menu is preceded by a
"").
The choice: Auto(ESCD), Manual.
 IRQ Resources: When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
 IRQ3/4/5/7/9/10/11/12/14/15 assigned to: This item allows you to determine the IRQ
assigned to the ISA bus and is not available to any PCI slot. Legacy ISA for devices
compliant with the original PC AT bus specification, PCI/ISA PnP for devices compliant with
the Plug and Play standard whether designed for PCI or ISA bus architecture.
The Choice: Legacy ISA and PCI/ISA PnP.
No
Disabled
Manual
Press Enter
Press Enter
Press Enter
Disabled
F6:Optimal defaults
Figure 3-6
29
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration
Data(ESCD) when you
exit Setup if you
have installed a new
add-on and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
F7:Standard Defaults