MSI 610BF Руководство - Страница 30

Просмотреть онлайн или скачать pdf Руководство для Материнская плата MSI 610BF. MSI 610BF 45 страниц.

Печатать страницу

PnP OS Installed

Reset Configuration Data

Resources Controlled By

 IRQ Resources

 DMA Resources

 Memory Resources

PCI/VGA Palette Snoop

Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help

F5:Previous Values

 PNP OS Installed: This item allows you to determine install PnP OS or not.

The choice: Yes, No.



Reset Configuration Data: Normally, you leave this field Disabled. Select Enabled to

reset Extended System Configuration Data (ESCD) when you exit Setup if you have

installed a new add-on and the system reconfiguration has caused such a serious conflict

that the operating system can not boot.

The choice: Enabled, Disabled .



Resource controlled by: The Award Plug and Play BIOS has the capacity to

automatically configure all of the boot and Plug and Play compatible devices. However,

this capability means absolutely nothing unless you are using a Plug and Play operating

system such as Windows95. If you set this field to "manual" choose specific resources

by going into each of the sub menu that follows this field (a sub menu is preceded by a

"").

The choice: Auto(ESCD), Manual.

 IRQ Resources: When resources are controlled manually, assign each system interrupt a

type, depending on the type of device using the interrupt.

 IRQ3/4/5/7/9/10/11/12/14/15 assigned to: This item allows you to determine the IRQ

assigned to the ISA bus and is not available to any PCI slot. Legacy ISA for devices

compliant with the original PC AT bus specification, PCI/ISA PnP for devices compliant with

the Plug and Play standard whether designed for PCI or ISA bus architecture.

The Choice: Legacy ISA and PCI/ISA PnP.

Disabled

Manual

Press Enter

Disabled

F6:Optimal defaults

Figure 3-6

Item Help

Menu Level

Default is Disabled.

Select Enabled to

reset Extended System

Configuration

Data(ESCD) when you

exit Setup if you

have installed a new

add-on and the system

reconfiguration has

caused such a serious

conflict that the OS

cannot boot

F7:Standard Defaults

