Epson Stylus COLOR 3000 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson Stylus COLOR 3000. Epson Stylus COLOR 3000 43 pagina's. Epson stylus color 3000: product information
Ook voor Epson Stylus COLOR 3000: Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Brochure & specificaties (24 pagina's), Handleiding voor snelle installatie (21 pagina's), Brochure & specificaties (2 pagina's), Specificaties (1 pagina's), Handmatig (13 pagina's), Brochure & specificaties (4 pagina's)

Installing the StylusRIP Software

Checking the Printer

Before you install the StylusRIP software, follow the

instructions in your printer's documentation to set up your

printer for use, making sure you perform the following steps:

If you'll be using the printer in a "typical" network

configuration (described on page 5 of the Introduction),

install an optional network interface card

Load paper, install ink cartridges, and make sure you allow

your printer to complete its entire ink charging cycle

Run a printer self test to make sure it operates properly

Connect the printer to the Macintosh or to the network

Install any software that came with the printer, including

the printer driver, utilities, and fonts

Send a sample print job to make sure the interface

connection is secure and the software is installed correctly

Once the printer is set up and tested fully, you're ready to

install the StylusRIP software on your system.

Caution:

Don't install the StylusRIP software until you've completely set up

and tested your EPSON Stylus printer or the software may not work

correctly.

Installing StylusRIP Standalone or

Print Server Software

Follow the steps in these sections to install the software on a

standalone Macintosh or on the print server system in a

network.

1-2