Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 16 pagina's. Warranty statement
Ook voor Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Specificatieblad (6 pagina's), Aan de slag (13 pagina's), Brochure & specificaties (6 pagina's), Snelle referentiehandleiding (12 pagina's), Netwerkhandleiding (46 pagina's), Installatiehandleiding (4 pagina's), Handleiding productinformatie (16 pagina's), Beperkte garantie (12 pagina's)

4. Adjust the length of the paper tray and the

paper tray cover according to the paper size.

If you do not extend them, the printout may

fall.

Note:

Make sure the roll paper support is not raised.

Caution:

Do not leave the paper in the printer for a long

period of time; its quality will deteriorate. We

recommend that you remove the paper from the

printer after printing.

Connecting the Printer with Your

Computer

Connect the printer and computer with a USB

cable or Ethernet cable. Use the following cables.

❏ USB cable

❏ 10BaseT or 100BaseTX Category 5 Shielded

twisted-pair cable

1. Make sure the printer is turned off.

2. Connect the cable to the printer, and plug the

other end of the USB cable to the computer or

the other end of the Ethernet cable to the

Ethernet hub.

USB connection:

Network connection:

Note:

When you connect both USB cable and Ethernet cable,

install the printer software from each computer

separately. You can connect both USB cable and

Ethernet cable to the printer at the same time.