Epson Stylus Pro 7600 Photographic Dye Ink Uitpakken en installatiehandleiding - Pagina 6

Blader online of download pdf Uitpakken en installatiehandleiding voor {categorie_naam} Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 24 pagina's. Epson stylus pro 7600: brochure
Ook voor Epson Stylus Pro 7600 Photographic Dye Ink: Brochure & specificaties (24 pagina's), Informatie handleiding (16 pagina's), Specificaties (4 pagina's), Snelle installatiehandleiding (34 pagina's), Productinformatie (15 pagina's), Snelle referentiehandleiding (11 pagina's), Garantie (8 pagina's), Brochure & specificaties (8 pagina's), Brochure & specificaties (16 pagina's), Handleiding voor productreferenties (28 pagina's), Handleiding bijwerken (4 pagina's)

Tools:

Hex wrench

Hex socket head bolts (4)

Wing nuts and spring washers (2)

I is for connecting the printer unit to the base unit.

Paper feed support films (5)

Assembling the base unit

Caution:

Have two people working on either side to

assemble the base unit (20.5 kg).

1. Hold base upright left (A) and a horizontal

strut as shown. Then fix the strut to the base

using the two hex socket head bolts (H) with

the hex wrench (G).

Note:

An instruction sticker about the setting paper

basket is attached to the side of a horizontal

strut. Attach the strut front so that you can

read the instructions.

Do not fasten the screws too tight. Leave a

room to adjust the position when you fasten

the screw on the other base upright.

2. Referring the Step 1, fix the other strut to the

base.

3. Fasten four screws on the both sides of the

base upright securely.

This completes assembly of the base unit. Before

attaching the paper basket, mount the printer on

the base unit.

Unpacking the printer

Caution:

The printer unit is heavy and unwieldy. Have

two people unpack the printer unit, and four

people place the printer unit on top of the base

unit.

1. Remove the accessory box (K), the polystyrene

foam (L), roll paper spindle (M), and roll paper

(N).

2. Remove the ink cartridges (O).