Epson Stylus Pro 7600 Photographic Dye Ink Ambalajdan Çıkarma ve Kurulum Kılavuzu - Sayfa 6

Yazılım Epson Stylus Pro 7600 Photographic Dye Ink için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Kılavuzu indirin. Epson Stylus Pro 7600 Photographic Dye Ink 24 sayfaları. Epson stylus pro 7600: brochure
Ayrıca Epson Stylus Pro 7600 Photographic Dye Ink için: Broşür ve Teknik Özellikler (24 sayfalar), Bilgi Kılavuzu (16 sayfalar), Teknik Özellikler (4 sayfalar), Hızlı Kurulum Kılavuzu (34 sayfalar), Ürün Bilgileri (15 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Garanti (8 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Broşür ve Teknik Özellikler (16 sayfalar), Ürün Referans Kılavuzu (28 sayfalar), Manuel Güncelleme (4 sayfalar)

Epson Stylus Pro 7600 Photographic Dye Ink Ambalajdan Çıkarma ve Kurulum Kılavuzu
Tools:
G
H
I
J
G:
Hex wrench
H:
Hex socket head bolts (4)
I:
Wing nuts and spring washers (2)
I is for connecting the printer unit to the base unit.
J:
Paper feed support films (5)
Assembling the base unit
c
Caution:
Have two people working on either side to
assemble the base unit (20.5 kg).
1. Hold base upright left (A) and a horizontal
strut as shown. Then fix the strut to the base
using the two hex socket head bolts (H) with
the hex wrench (G).
Note:
An instruction sticker about the setting paper
basket is attached to the side of a horizontal
strut. Attach the strut front so that you can
read the instructions.
Do not fasten the screws too tight. Leave a
room to adjust the position when you fasten
the screw on the other base upright.
H
A
4
2. Referring the Step 1, fix the other strut to the
base.
3. Fasten four screws on the both sides of the
base upright securely.
This completes assembly of the base unit. Before
attaching the paper basket, mount the printer on
the base unit.
Unpacking the printer
c
Caution:
The printer unit is heavy and unwieldy. Have
two people unpack the printer unit, and four
people place the printer unit on top of the base
unit.
1. Remove the accessory box (K), the polystyrene
foam (L), roll paper spindle (M), and roll paper
(N).
L
2. Remove the ink cartridges (O).
O
K
N
M
L