Epson WorkForce 600 Series Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 38 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (34 pagina's), Cartridges vervangen (2 pagina's), Belangrijke installatie-informatie (2 pagina's), Specificaties (2 pagina's), Start hier Handleiding (9 pagina's), Product ondersteunings bulletin (5 pagina's), Functiehandboek (28 pagina's)

Epson WorkForce 600 Series Gebruikershandleiding

Connecting the Cable

You can connect the USB/Parallel Adapter directly to a USB port on your
iMac or to a USB hub connected to a port on the iMac. If you have any
printing problems when the printer is connected via a USB hub, try
connecting the printer directly to the USB port on the iMac instead.
1
To connect the adapter to the USB port on the side of the iMac, first
open the port door. Hold the adapter's USB connector so the
faces up and connect it to the available USB port.
available USB port
optional USB hub
If you're using a USB hub, plug it into the USB port on your iMac, then
connect the adapter to an available USB port on the hub.
1
2
USB/Parallel adapter
OR
10
icon