Epson WorkForce 600 Series Belangrijke installatie-informatie

Blader online of download pdf Belangrijke installatie-informatie voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 2 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Cartridges vervangen (2 pagina's), Specificaties (2 pagina's), Start hier Handleiding (9 pagina's), Product ondersteunings bulletin (5 pagina's), Functiehandboek (28 pagina's)

Important Setup Information

Network Connection

(Wireless or Wired)

1. If you're connecting to a network, use the

Ethernet cable that came with your product.

IMPORTANT:

Connect the cable for wireless or wired

networks. For a wireless connection, you'll

remove the cable later.

2. Set up your product using the Start Here sheet,

including setting the date and time. DO NOT

follow the steps in the "Install Software" section.

3. Install your software using the Network

Installation Guide.

For a variety of network setup information, go to:

www.epson.com/support/wireless

Direct Connection (USB)

1. If you are NOT installing your product on a

network, connect it using a USB cable (not

included).

You can purchase a USB cable at most

electronics stores.

2. Set up your product, including setting the date

and time, and install your software as described

on the Start Here sheet.

Ethernet network

cable (included)

Printed in/Pays d'impression : Indonesia

USB cable

(not included)

CPD-26496R1