Epson WorkForce 600 Series Informasi Pengaturan Penting

Jelajahi secara online atau unduh pdf Informasi Pengaturan Penting untuk Perangkat lunak Epson WorkForce 600 Series. Epson WorkForce 600 Series 2 halaman. Using the control panel for wireless network installation
Juga untuk Epson WorkForce 600 Series: Panduan Instalasi Jaringan (41 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (38 halaman), Penggantian Kartrid (2 halaman), Spesifikasi (2 halaman), Mulai dari Sini Manual (9 halaman), Buletin Dukungan Produk (5 halaman), Manual Fungsi (28 halaman)

Important Setup Information

Network Connection

(Wireless or Wired)

1. If you're connecting to a network, use the

Ethernet cable that came with your product.

IMPORTANT:

Connect the cable for wireless or wired

networks. For a wireless connection, you'll

remove the cable later.

2. Set up your product using the Start Here sheet,

including setting the date and time. DO NOT

follow the steps in the "Install Software" section.

3. Install your software using the Network

Installation Guide.

For a variety of network setup information, go to:

www.epson.com/support/wireless

Direct Connection (USB)

1. If you are NOT installing your product on a

network, connect it using a USB cable (not

included).

You can purchase a USB cable at most

electronics stores.

2. Set up your product, including setting the date

and time, and install your software as described

on the Start Here sheet.

Ethernet network

cable (included)

Printed in/Pays d'impression : Indonesia

USB cable

(not included)

CPD-26496R1