Epson WorkForce 600 Series 중요한 설정 정보

{카테고리_이름} Epson WorkForce 600 Series에 대한 중요한 설정 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson WorkForce 600 Series 2 페이지. Using the control panel for wireless network installation
Epson WorkForce 600 Series에 대해서도 마찬가지입니다: 네트워크 설치 매뉴얼 (41 페이지), 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (9 페이지), 제품 지원 게시판 (5 페이지), 기능 설명서 (28 페이지)

Important Setup Information

Network Connection

(Wireless or Wired)

1. If you're connecting to a network, use the

Ethernet cable that came with your product.

IMPORTANT:

Connect the cable for wireless or wired

networks. For a wireless connection, you'll

remove the cable later.

2. Set up your product using the Start Here sheet,

including setting the date and time. DO NOT

follow the steps in the "Install Software" section.

3. Install your software using the Network

Installation Guide.

For a variety of network setup information, go to:

www.epson.com/support/wireless

Direct Connection (USB)

1. If you are NOT installing your product on a

network, connect it using a USB cable (not

included).

You can purchase a USB cable at most

electronics stores.

2. Set up your product, including setting the date

and time, and install your software as described

on the Start Here sheet.

Ethernet network

cable (included)

Printed in/Pays d'impression : Indonesia

USB cable

(not included)

CPD-26496R1