Epson WorkForce 600 Series Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 38 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (34 pagina's), Cartridges vervangen (2 pagina's), Belangrijke installatie-informatie (2 pagina's), Specificaties (2 pagina's), Start hier Handleiding (9 pagina's), Product ondersteunings bulletin (5 pagina's), Functiehandboek (28 pagina's)

Installing the USB printer driver software

Don't install the printer driver software that came with your printer. You

can't use this driver software with your USB/Parallel adapter. However, you

can use the USB printer software to connect the printer to your computer via

the parallel port, if you want.

Note:

If you install the printer driver software by mistake, see page 20 for

instructions on deleting the driver's INF file.

Restart your computer. Then turn on the USB hub (if you're using one)

and your EPSON printer. You see the Add New Hardware Wizard

screen.

Insert the USB Printer Software CD-ROM in your CD-ROM drive.

Click Next. At the next screen, select Search for the best driver for

your device and click Next.