Epson WorkForce 600 Series Gebruikershandleiding - Pagina 28

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 38 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (34 pagina's), Cartridges vervangen (2 pagina's), Belangrijke installatie-informatie (2 pagina's), Specificaties (2 pagina's), Start hier Handleiding (9 pagina's), Product ondersteunings bulletin (5 pagina's), Functiehandboek (28 pagina's)

Continue with the instructions to install your creative software

applications.

When you've finished installing the creative software, restart

your system.

Checking your installation

To verify that your USB software installed properly, check the

Device Manager. Click Start, point to Settings, and click Control

Panel. Then click System and click the Device Manager tab.

You should see the device EPSON USB Conversion Cable

Devices listed. Click the + next to the device; you should see

EPSON USB Conversion Cable (EPXUSB1:) listed too.

Note:

If you've installed more than one USB printer device, each new

installation will increase the last digit of the USB conversion cable

device name by a factor of one. For example, a second installed

USB printer device would be listed as EPSON USB Conversion

Cable (EPXUSB2:), and a third installation would be listed as

EPSON USB Conversion Cable (EPXUSB3).