Epson WorkForce 600 Series Functiehandboek - Pagina 12

Blader online of download pdf Functiehandboek voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 28 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Cartridges vervangen (2 pagina's), Belangrijke installatie-informatie (2 pagina's), Specificaties (2 pagina's), Start hier Handleiding (9 pagina's), Product ondersteunings bulletin (5 pagina's)

Confirming Your Wireless Connection

Wait for the printer to connect to your wireless network. Once it's connected, you

see a wireless signal strength indicator in the top right corner of the printer's LCD

screen.

Not connected

Continue with the steps in the next section to install software.

Note:

If the printer doesn't connect to your wireless network after 90 seconds, the WEP key

or WPA passphrase may have been entered incorrectly. See "Connecting to Your

Wireless Network" on page 3 to select your network settings again.

If the connection fails a second time, your router or access point may have MAC

address filtering enabled. See page 25 to print a network status sheet to obtain the

MAC address. Then see your router or access point's documentation to add the

printer's MAC address to the approved devices list.

Installing Software

The steps show installation screens for the WorkForce 600 Series, but the

installation instructions are the same for other models.

1. Insert the printer software CD.

2. Windows Vista: If you see the AutoPlay window, click

When you see the User Account Control screen, click

Windows XP: When you see the Software installation screen, continue with

step 3.

Mac OS X: Double-click the

Installing Software

Connected

icon.

Run Epsetup.exe

Continue