Aeon Labs Nano Shutter Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aeon Labs Nano Shutter. Aeon Labs Nano Shutter 10 pagina's.

N – Power input for +24VDC

L – Power input for -24VDC

IN – Input for load power supply +24VDC.

OUT1 – Output for Motor direction 1.

OUT2 – Output for Motor direction 2.

S1 – External switch 1 control for Motor. (use -24VDC)

S2 – External switch 2 control for Motor. (use -24VDC)

3. Install Nano Shutter to the gang box.

a. Live/Hot wire connection: Connect the Live/Hot wire to the "L" terminal on the Nano Shutter. + Live/Hot on External

Switch input.

b. Neutral wire connection: Connect the Neutral wire to the "N" terminal on the Nano Shutter.

b. Load wire neutral connection (To AC Neutral): Connect the Load/Motor neutral wire to your AC Neutral connection.

c. Load wire motor connection (To Nano Shutter): Connect the 2 Load/Motor wires (Motor direction 1 and Motor

direction 2) to "OUT1" and "OUT2" on Nano Shutter.

d. External/manual Switch connection: Connect 2 18AWG wires to the "S1" and "S2" on the Nano Shutter.

d. External/manual Switch connection: Connect 2 18AWG wires form the 2 terminals on the External/manual Switch to

the Live wire.

Note: This is the physical connection diagram for 120/230VAC power input.