Pioneer VSX-604S Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-604S. Pioneer VSX-604S 34 pagina's.

FRONT PANEL FACILITIES
@ SFC MODE button *
Each time you press it, the mode and the display indications
change as follows.
ie STUDIO —
SIMULATED SURROUND
off
ARENA
DISPLAY OFF button
This switches the display OFF.
@) SUPER BASS button *
Press this button when you want to boost the bass.
DOLBY PRO-LOGIC button *
Switches DOLBY PRO-LOGIC SURROUND on and off.
@) MASTER VOLUME control
Use it to simultaneously adjust the sound volume from the
front, center, and rear speakers.
@2 VIDEO INPUT button
Press when performing playback on a VCR connected to
VIDEO INPUT jacks on the front panel.
(3 RESET button
Use this when normal operation is not possible because of
external influences such as static electricity or lightning, or
when operations are not functioning even when operation
buttons are pressed. Press this button to return to normal
operating conditions.
PHONES jack
Connect the plug on your headphones to this jack. Set
SPEAKERS A and B switches to OFF if you want to cut the
sound from the speakers and listen to it only through the
headphones.
45) VIDEO INPUT jacks
VIDEO components such as a VCR or TV camera, etc. can be
connected.
Display section
See page 16.
* Setting is memorized separatery for each input selector
button.
@ Tuner operation buttons
FM/AM button:
Use this to switch between FM and AM frequency band reception.
MPX MODE button:
Normally, leave in this mode for reception. When a stereo FM
broadcast is received, it will be automatically reproduced in stereo.
Monaural mode
This button has no effect on reception of AM broadcasts.
(83 SELECT button
Press this button to switch to the station mode. Then you
can turn the MULTI-JOG to select a station.
When in the Frequency mode, tuning the MULTI-JOG raises
or lowers the frequency.
GUI MODE button
Switches GUI MODE
on and off.
@ Multi-jog
Use during tuner operation to select frequencies and station
numbers. During GUI operation, use to move the on-screen cursor.
@) ENTER button
Press this button when you are in the frequency preset mode, and
the displayed frequency is memorized in the selected station.
(Station indications stop flashing and stay lit.)
When GUI is ON,Press to execute an operation selected with
the multi-jog 2.
@ MEMORY button
Press this button to switch to the frequency preset mode.
(When GUI is ON, it does not operate.)
@ BASS control
Use to adjust the low-frequency level. Turn clockwise to boost
bass, and counterclockwise to attenuate bass.
@ TREBLE control
Use to adjust the high-frequency level. Turn clockwise to
boost treble, and counterclockwise to attenuate treble,
@ BALANCE control
Use to adjust the sound volume balance between left and
right speakers.
L: Decreases the sound on the right side.
R: Decreases the sound on the left side.
Usually, left and right volume levels should be the same.
15
<ARBIO22>