Pioneer VSX-604S Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-604S. Pioneer VSX-604S 34 stron.

Drukuj stronę

FRONT PANEL FACILITIES

@ SFC MODE button *

Each time you press it, the mode and the display indications

change as follows.

ie STUDIO —

SIMULATED SURROUND

off

ARENA

DISPLAY OFF button

This switches the display OFF.

@) SUPER BASS button *

Press this button when you want to boost the bass.

DOLBY PRO-LOGIC button *

Switches DOLBY PRO-LOGIC SURROUND on and off.

@) MASTER VOLUME control

Use it to simultaneously adjust the sound volume from the

front, center, and rear speakers.

@2 VIDEO INPUT button

Press when performing playback on a VCR connected to

VIDEO INPUT jacks on the front panel.

(3 RESET button

Use this when normal operation is not possible because of

external influences such as static electricity or lightning, or

when operations are not functioning even when operation

buttons are pressed. Press this button to return to normal

operating conditions.

PHONES jack

Connect the plug on your headphones to this jack. Set

SPEAKERS A and B switches to OFF if you want to cut the

sound from the speakers and listen to it only through the

headphones.

45) VIDEO INPUT jacks

VIDEO components such as a VCR or TV camera, etc. can be

connected.

Display section

See page 16.

* Setting is memorized separatery for each input selector

button.

@ Tuner operation buttons

FM/AM button:

Use this to switch between FM and AM frequency band reception.

MPX MODE button:

Normally, leave in this mode for reception. When a stereo FM

broadcast is received, it will be automatically reproduced in stereo.

Monaural mode

This button has no effect on reception of AM broadcasts.

(83 SELECT button

Press this button to switch to the station mode. Then you

can turn the MULTI-JOG to select a station.

When in the Frequency mode, tuning the MULTI-JOG raises

or lowers the frequency.

GUI MODE button

Switches GUI MODE

on and off.

@ Multi-jog

Use during tuner operation to select frequencies and station

numbers. During GUI operation, use to move the on-screen cursor.

@) ENTER button

Press this button when you are in the frequency preset mode, and

the displayed frequency is memorized in the selected station.

(Station indications stop flashing and stay lit.)

When GUI is ON,Press to execute an operation selected with

the multi-jog 2.

@ MEMORY button

Press this button to switch to the frequency preset mode.

(When GUI is ON, it does not operate.)

@ BASS control

Use to adjust the low-frequency level. Turn clockwise to boost

bass, and counterclockwise to attenuate bass.

@ TREBLE control

Use to adjust the high-frequency level. Turn clockwise to

boost treble, and counterclockwise to attenuate treble,

@ BALANCE control

Use to adjust the sound volume balance between left and

right speakers.

L: Decreases the sound on the right side.

R: Decreases the sound on the left side.

Usually, left and right volume levels should be the same.