Pioneer VSX-605S Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-605S. Pioneer VSX-605S 37 pagina's. Audio/video stereo receiver
Ook voor Pioneer VSX-605S: Gebruiksaanwijzing (37 pagina's)

Pagina afdrukken

Only muiti-veltage model is provided with. these

switches. Round 2-pin AC plug, U.S. and Canadian

models are not provided with these switches. Mains

voltages in Saudi Arabia are.127 V. and.220 V.only.

Never use this model with the 110 V setting in Saudi

Arabia.

The line voltage selector.switches. are.on.the rear panel..Check

that they are set properly before plugging the power cord inte the

household-wall socket. If the voltage is not properly set or if you

move to'ararea where the voltage requirements differ, adjust the

selector switches as follows.

1, Use a medium:size screwdriver.

2: First, insert the screwdriver in the groove of the voltage selector

at the right, and adjust so that the tip of the groove points to the

voltage value of your area.

3. Next, insert the screwdriver in the groove of the voltage selector

at the left and adjust until the voltage is the same as at the right.

TWO VOLTAGE SELECTORS —————----—-—-—

q0Vv

120-127

PAL/NTSC SWITC

(Multi-voltage

model only)

This unit uses the TV screen to operate the system. Set the rear

panel PAL/NTSC switch to match your TV's color system. The

sergen will be unciear if the color systern does not match.

PAL

NTSC LY.

TO MONITOR Ty

if S

intelligent

/ System Control

{SC is anew method of operating AV equipments proposed by Pioneer.

It allows the following equipments made by other manufacturers

to be controlled easily with the VSX-605S/VSX-635S

and

accompanying remote control unit.

@ Control of Equipments Made by Other Manufacturers

(iv

sony

VCR VICTOR

TAPE SONY

VSX-6058

VSX-635S

LD PIONEER

(Multi

The unit has been factory preset to the channel allocation value

for the area in which it is to be sold. if this value is set incorrectly,

the tuned in frequency may be wrong, or sound may be distorted,

resulting in an inability to reproduce reception signals at their

proper sound quality. For this reason, be sure to confirm that the

values are set correctly before first using the unit.

(FM 100 kHz/AM 10 kHz) position:

Set to this position for areas with an FM reception step of 100 kHz

and AM 10 kHz.

(FM 50 kHz/AM 9 kHz) position:

Set to this position, for areas with an FM reception step of 50 kHz

and AM 9 kHz.

NOTE:

When unsure about the channel allocation for your area, consult

your dealer for correct information.

1OkHz tOQkHz

CHANNEL STEP

Present

Pioneer

products

or products

made

by other

manufacturers (video deck, TV, LD player, CD player, etc.) can be

easily controlled using GU} or the remote control unit by presetting

the remote control codes other manufacturers provided or

presetting by learning. (Pages 30 and 31}

% One-Touch Operation

POWER :ON |

-———A.

FUNC

Ent

~vsxe0ss. | PLAY START

VSX-635S

Nee