Pioneer VSX-605S Інструкція з експлуатації Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стерео приймач Pioneer VSX-605S. Pioneer VSX-605S 37 сторінок. Audio/video stereo receiver
Також для Pioneer VSX-605S: Інструкція з експлуатації Посібник з експлуатації (37 сторінок)
Друкувати сторінку
Only muiti-veltage model is provided with. these
switches. Round 2-pin AC plug, U.S. and Canadian
models are not provided with these switches. Mains
voltages in Saudi Arabia are.127 V. and.220 V.only.
Never use this model with the 110 V setting in Saudi
Arabia.
The line voltage selector.switches. are.on.the rear panel..Check
that they are set properly before plugging the power cord inte the
household-wall socket. If the voltage is not properly set or if you
move to'ararea where the voltage requirements differ, adjust the
selector switches as follows.
1, Use a medium:size screwdriver.
2: First, insert the screwdriver in the groove of the voltage selector
at the right, and adjust so that the tip of the groove points to the
voltage value of your area.
3. Next, insert the screwdriver in the groove of the voltage selector
at the left and adjust until the voltage is the same as at the right.
TWO VOLTAGE SELECTORS —————----—-—-—
q0Vv
120-127
PAL/NTSC SWITC
(Multi-voltage
model only)
This unit uses the TV screen to operate the system. Set the rear
panel PAL/NTSC switch to match your TV's color system. The
sergen will be unciear if the color systern does not match.
PAL
NTSC LY.
TO MONITOR Ty
if S
intelligent
/ System Control
{SC is anew method of operating AV equipments proposed by Pioneer.
It allows the following equipments made by other manufacturers
to be controlled easily with the VSX-605S/VSX-635S
and
accompanying remote control unit.
@ Control of Equipments Made by Other Manufacturers
(iv
sony
a
VCR VICTOR
TAPE SONY
VSX-6058
VSX-635S
LD PIONEER
7)
(Multi
The unit has been factory preset to the channel allocation value
for the area in which it is to be sold. if this value is set incorrectly,
the tuned in frequency may be wrong, or sound may be distorted,
resulting in an inability to reproduce reception signals at their
proper sound quality. For this reason, be sure to confirm that the
values are set correctly before first using the unit.
(FM 100 kHz/AM 10 kHz) position:
Set to this position for areas with an FM reception step of 100 kHz
and AM 10 kHz.
(FM 50 kHz/AM 9 kHz) position:
Set to this position, for areas with an FM reception step of 50 kHz
and AM 9 kHz.
NOTE:
When unsure about the channel allocation for your area, consult
your dealer for correct information.
1OkHz tOQkHz
CHANNEL STEP
Present
Pioneer
products
or products
made
by other
manufacturers (video deck, TV, LD player, CD player, etc.) can be
easily controlled using GU} or the remote control unit by presetting
the remote control codes other manufacturers provided or
presetting by learning. (Pages 30 and 31}
% One-Touch Operation
ai
POWER :ON |
-———A.
FUNC
=D
Ent
~vsxe0ss. | PLAY START
VSX-635S
Nee
4
<ARB7O59>