Pioneer GM-6200F Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Pioneer GM-6200F. Pioneer GM-6200F 14 pagina's. Bridgeable four-channel power amplifier
Ook voor Pioneer GM-6200F: Gebruikershandleiding (9 pagina's), Servicehandleiding (33 pagina's)

Pagina afdrukken

Connecting the Power Terminal

• Always use the special red battery and ground

wire [RD-223], which is sold separately. Connect

the battery wire directly to the car battery positive

terminal (+) and the ground wire to the car body.

1. Pass the battery wire from the

engine compartment to the interior

of the vehicle.

• After making all other connections to the

amplifier, connect the battery wire terminal of

the amplifier to the positive (+) terminal of

the battery.

Fuse (30 A)

Positive terminal

Insert the O-ring rubber

grommet into the vehicle

body.

2. Twist the battery wire, ground wire

and system remote control wire.

3. Attach lugs to wire ends. Lugs not

supplied.

• Use pliers, etc., to crimp lugs to wires.

4. Connect the wires to the terminal.

• Fix the wires securely with the terminal

screws.

GND terminal

Power terminal

Battery wire

Engine

Interior of

compart-

the vehicle

ment

Drill a 14 mm

(1/2 inch) hole

into the vehicle

body.

System remote

control terminal

System remote

control wire

Ground wire

WARNING

Failure to securely fasten the battery wire to the ter-

minal using the terminal screws could cause the ter-

minal area to overheat and could result in damage

and injury including minor burns.

Connecting the Speaker Output

Terminals

1. Expose the end of the speaker wires

using nippers or a cutter by about

10 mm (3/8 inch) and twist.

2. Attach lugs to speaker wire ends.

Lugs not supplied.

• Use pliers, etc., to crimp lugs to wires.

3. Connect the speaker wires to the

speaker output terminals.

• Fix the speaker wires securely with the termi-

nal screws.

Terminal screw

Speaker

output

terminal

Speaker wire