Pioneer GM-D9605 Servicehandleiding - Pagina 4

Blader online of download pdf Servicehandleiding voor {categorie_naam} Pioneer GM-D9605. Pioneer GM-D9605 29 pagina's. Bridgeable four-channel power amplifier

Pagina afdrukken

1.3 NOTES ON REPLACING PARTS

Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic

induction.

Please attach the Sheet between Power Transistor and Heat Sink when you place Power Transistor in Heat Sink.

If the Sheet is not attached between Power Transistor and Heat Sink, Power Transistor might be damaged.

When you replace sheets (#9 (16170201000) & #10 (16170201000) on the page 14), re-apply silicon

grease (GEM1057) after wiping off silicon grease.

The part listed below is difficult to replace as a discrete component part.

When the part listed in the table is defective, replace whole Assy.

Unit Name

Amp Unit

When you replace a part fixed to the heatsink (Q515~518, Q716~718, Q720~722, D720~723, Q731, 732, IC703 and

704), adjust the position of the part according to the following procedure.

Ref No.

IC113

IRS2093

Q105/106

IRF6775M

Q205/206

IRF6775M

Q305/306

IRF6775M

Q405/406

IRF6775M

GM-D9605/XEEL

Part No.

Remarks

There back heat pad

Special MOSFET

Put the Amp Unit on blocks.

Put a paper between the block and the Amp Unit,

and outline transistors and diodes.

Put a part to replace in the outline.