Pioneer CDJ 1000MK3 - Professional CD/MP3 Turntable Gebruiksaanwijzing - Pagina 18
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer CDJ 1000MK3 - Professional CD/MP3 Turntable. Pioneer CDJ 1000MK3 - Professional CD/MP3 Turntable 24 pagina's. Cd player
Ook voor Pioneer CDJ 1000MK3 - Professional CD/MP3 Turntable: Gebruiksaanwijzing (34 pagina's), Gebruiksaanwijzing (35 pagina's)
Pagina afdrukken
Advanced Operations
Advanced Operations
LOOP IN/REALTIME
LOOP OUT
CUE (IN ADJUST)
(OUT ADJUST)
HOT CUE A
HOT CUE B
HOT CUE C
HOT CUE
REC MODE
DIRECTION
FWD/REV
SEARCH
1, ¡
CUE
PLAY/PAUSE
6
Jog dial
Scratch play
When jog mode is set to [VINYL], pressing the top surface of the jog dial
and turning it causes playback to occur in proportion to the speed and
direction of jog dial rotation.
1. Press the JOG MODE SELECT button so the [VINYL] indi-
cator lights.
2. During playback, press the top surface of the jog dial.
¶ Playback will slow and stop (the deceleration time until full stop
["response characteristics"] can be set separately). If the jog dial
is rotated before playback decelerates to full stop, sound will stop,
and playback will then be performed in response to the direction
and speed of jog dial rotation in step 3.
3. Rotate the jog dial in the direction and at the speed you
wish playback to be performed.
¶ Playback will be heard in the direction and speed proportional to
the jog dial rotation.
4. Remove hand from jog dial.
¶ Playback will either acceleration or decelerate to return to its sta-
tus before the jog dial was touched (the acceleration/deceleration
time until playback returns to its previous condition ["response
characteristics"] can be set separately).
7 How to set the deceleration response
characteristics (time required for playback to
decelerate to full stop when jog dial surface is
pressed):
Rotate the VINYL SPEED ADJUST TOUCH/BRAKE dial.
¶ This dial allows you to adjust the slowdown in speed (response char-
acteristics) until playback stops.
¶ This is the same setting as the deceleration speed adjustment used
when the PLAY/PAUSE button (6) is pressed in VINYL mode to
temporarily pause playback ( P. 14).
7 How to set reacceleration response
characteristics (time required for playback to
return to previous speed when hand is removed
from jog dial surface):
Rotate the VINYL SPEED ADJUST RELEASE/START dial.
¶ This dial allows you to adjust the slowdown or increase in speed until
playback returns to normal playback (response characteristics).
¶ This is the same setting as the acceleration speed adjustment used
when the PLAY/PAUSE button (6) is pressed in VINYL mode to
resume playback ( P. 14).
18
RELOOP/EXIT
VINYL
During playback in VINYL mode, either press the surface of the jog dial
SPEED
or press the PLAY/PAUSE button (6) to pause playback, then rotate
ADJUST
TOUCH
the jog dial quickly; playback will occur in the direction and at a speed
/BRAKE
proportional to the direction and speed of jog dial rotation, even if you
then release your hand from the jog dial.
VINYL
SPEED
ADJUST
RELEASE
/START
¶ During playback in VINYL mode, if the PLAY/PAUSE button (6) is
JOG
MODE
SELECT
¶ When the PLAY/PAUSE button (6) is pressed once again to resume
7 Defining a loop
1. Press the PLAY/PAUSE button (6) to begin playback.
2. During playback or pause, press the LOOP IN/REALTIME
3. When playback reaches the desired loop-out point, press
7 To cancel a loop
During loop playback, press the RELOOP/EXIT button.
¶ When the playback reaches the loop-out point, it will continue nor-
7 To change a loop-in point
1. During loop play, press the LOOP IN/REALTIME CUE (IN
2. Press the SEARCH button (1, ¡) or rotate the jog dial.
7 To change a loop-out point
1. During loop play, press the LOOP OUT (OUT ADJUST)
2. Press the SEARCH button (1, ¡) or rotate the jog dial.
Spin play
Braking
pressed to pause playback, the sound decelerates at the braking speed
set with the VINYL SPEED ADJUST TOUCH/BRAKE dial.
playback, the sound accelerates at the speed set with the VINYL
SPEED ADJUST RELEASE/START dial.
Loop playback
CUE button.
¶ This operation is not required if a prerecorded cue point has al-
ready been set as the loop start point.
the LOOP OUT button.
¶ Playback will begin between the loop-in and loop-out points.
¶ During MP3 play, the loop can be set only between points set
within the same track.
¶ When the loop has been set, the RELOOP/EXIT button lights.
mally, without returning to the loop-in point.
ADJUST) button.
¶ The display will show the in-point time; the LOOP IN/REALTIME
CUE button will change to quick flashing, while the LOOP OUT
button light will go out.
¶ The loop-in point will change in one-frame increments. The per-
missible range for adjusting an in point is ±30 frames, and it must
be set before any out point.
¶ In the case of MP3, adjustment of loop positions is possible only
within the same track where cue points are set.
¶ Loop-in point cannot be modified during reverse play and scratch
play.
¶ When the LOOP IN/REALTIME CUE button is pressed or 30 sec-
onds elapses, the adjustment mode is canceled and loop play
resumes.
button.
¶ The display will show the out-point time; the LOOP OUT button
will change to quick flashing, while the LOOP IN/REALTIME CUE
button light will go out.
¶ The loop-out point will change in one-frame increments.
¶ The loop-out point cannot be moved to a position before the loop-
in point.
¶ In the case of MP3, adjustment of loop positions is possible only
within the same track where cue points are set.
¶ Loop-out point cannot be modified during reverse play and scratch
play.
¶ When the LOOP OUT button is pressed or 30 seconds elapses,
the adjustment mode is canceled and loop play resumes.