Dinex 611220 (208V/240V) Bedienings- en onderhoudshandleiding - Pagina 2

Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} Dinex 611220 (208V/240V). Dinex 611220 (208V/240V) 8 pagina's. Induction base heating or change to cook-top mode for use with induction cooking pans.

Pagina afdrukken

Introduction

You have purchased the new Dinex® Smart•Therm™

Induction Charger. Please read this manual for helpful

guidelines on how to use your Equipment. Should you

have any questions concerning the Equipment, please call

the Dinex® Service at 1-888-673-4639.

IMPORTANT: For your safety, read and follow all cautions,

information and warnings.

FREIGHT DAMAGE CLAIMS

Your Smart•Therm Induction Charger was carefully

inspected and packed before leaving our factory. The

transportation company assumes full responsibility for

safe delivery of this equipment. Dinex® cannot assume

responsibilities for damage or loss incurred in transit.

Visible damage or loss should be noted on the freight bill

and signed by the person making the delivery.

A freight claim should be filed immediately with the trans-

portation company. If damage is unnoticed or concealed

until equipment is unpacked, notify the transportation

company immediately and tell them you want to file a

concealed damage claim. This must be done within fifteen

(15) days after delivery was made. Be sure to retain all

packing material and cartons.

WARNING: Use of this symbol identifies a potentially

hazardous situation which, if not avoided, may result in

damage to the machine or injury to the operator.

CAUTION: If the product is used without observing the

information given under this symbol, minor personal

injury, or damage to equipment may result.

WARNING: Installation of this equipment should be

performed only by persons qualified or licensed to install

electrical equipment.

• Adjustments and service work should be performed only

by qualified service technicians.

• This equipment is intended for commercial use only.

Not for household use.

• Use of other than genuine Dinex® replacement parts or

service work performed by other than authorized Dinex®

service agents will void the warranty.

• Do not use any corrosive cleaners. Use only mild

detergents.

APPLICATION & USE

The Eq u i p m e nt is for co m m e rcial use in the food serv i ce

i n d u s t ry. It provides maximum induction heating co m p at i b l e

Di n ex® bases. Use in Sm a rt • Th e rm ™ m ode with Di n ex ®

Sm a rt • Th e rm™ base only. Modes 611120 & 611220 can also

be used in coo k - top mode after re m oval of base locato r.

SAFETY

The instructions contained in this manual provide impor-

tant guidelines for the Equipment user regarding a correct

and safe installation. Particular attention should be paid to

the warnings given in various parts of this manual. Do not

attempt to repair this equipment. Repairs are to be per-

formed by authorized personnel only.

• Do not use the machine if glass is broken or if anything

melts onto it.

• Always use an i n d u ction co m p a t i b l e pan 8 inches or more

in diameter on the cook-top surface. (cook-top mode)

• Never use the machine as a work surf a ce or cutting bo a rd.

• Do not attempt to heat aluminum fo i l .

• Never attempt to cook food dire ct ly on the glass surf a ce.

• Always have the base loca tor in place when heating induct i o n

b a s e s.

IMPORTANT: Do not put Smart•Therm

oven.

INFO: Please note that this appliance is for commercial

use only and must be used exclusively for the purposes

prescribed.

IMPORTANT: The following instructions reduces the risk

of fire, electrical shock or injury.

SET UP

1. Carefully remove any packing material from the charger

and check loose packing material for small parts or

accessories. Inspect charger for concealed damage

before putting packing material aside. Keep packing

until you are confident with equipment application.

2. The Smart•Therm™ charger (mdl 611120) is equipped

with a three-prong electrical plug. The Smart•Therm™

chargers (mdls 611220, 611208, 611240) are equipped

with a locking plug. These plugs are part of a system

that will protect you from serious injury if something

goes wrong with the electrical wiring in the charger. Be

sure the plug is plugged into a matching soc ket that is

p ro pe rly gro u n d e d.

WARNING: DO NOT cut or break off the large third prong

in this plug, or change the plug or power cord in any way.

Doing so will create a safety hazard and also void the

warranty.

3. MAKE SURE THAT INCOMING VOLTAGE MATCHES

CHARGER REQUIREMENTS. A product identification

l a bel on the bo t tom of the charger specifies the ope rat-

ing vo l t a g e, wat t a g e, c u rre nt, f re q u e n cy, and phase of

c h a rg e r. Plugging or wiring the charger into less vo l t-

age than the charger is rated may significa nt l y

d e c rease the pe rfo rm a n ce or seve rely damage elec-

t ronic co m po n e nt s.

Page 2

™

base in microwave