Whirlpool 4322658A Handmatig - Pagina 25

Blader online of download pdf Handmatig voor {categorie_naam} Whirlpool 4322658A. Whirlpool 4322658A 48 pagina's. In-door ice system

DIAGNOSTICS & TROUBLESHOOTING

Diagnostics are used to determine whether the

optics circuits are operating properly. If the

optics circuits are malfunctioning, the ice maker

will not operate.

The optics system consists of an emitter board

and a receiver board. The emitter board trans-

mits a beam of infrared light that is detected

by the receiver. If the beam of light is inter-

rupted, the ice maker will not operate.

FLOW CHART TO

DETERMINE OPTICS

BOARD DESIGN

Wait 5 minutes and

use 2002 Design Optics

Mode on Page 5-4.

Proceed to 2002

Design Optics

Mode on Page 5-4.

The optics system can have one of two types

of optics board designs installed: the original

design, or the 2002 design.

Use the following flow chart to determine which

of the board designs are installed. Once this is

determined, you will be directed to perform the

appropriate optics diagnostics procedure.

Close the freezer

door for a minimum

of 1 minute.

Open the freezer

LED is flashing 2

Yes

pulses repeated.

Hold in the freezer

light switch.

LED is flashing at 1 second

intervals indicating a 5 minute

Yes

"harvest" mode.

Proceed to Original

Design Optics

Mode on Page 5-2.

5-1

door.