Whirlpool  WED9051YW Handleiding voor installatie-instructies - Pagina 18

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Whirlpool  WED9051YW. Whirlpool  WED9051YW 20 pagina's. Installation guide
Ook voor Whirlpool  WED9051YW: Gebruiks- en onderhoudshandleiding (20 pagina's)

Pagina afdrukken
6.
Turn on cold water faucet
Check that the water faucets are turned on.
7.
Check for leaks
Check for leaks around "Y" connector, faucets, and hoses.

CONNECT VENT

1.
Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.
18
2.
Move dryer to final location
Move dryer to final location. Avoid crushing or kinking vent.
After dryer is in place, remove cardboard from under dryer.

LEVEL DRYER

1.
Level Dryer
Place
level here
Check levelness of dryer from side to side. Repeat from
front to back.
NOTE: The dryer must be level for the moisture sensing system
to operate correctly.
Not Level
LEVEL
Not Level