Whirlpool 3LWED5500 Gebruiks- en onderhoudshandleiding - Pagina 4

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool 3LWED5500. Whirlpool 3LWED5500 48 pagina's.

SPECIFICATIONS

These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few of
the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects a
maximum load size that can be loaded into the dryer.
IEC Capacity: The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specific cycle.

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Good Air Flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See Installation
Instructions.
The venting system attached to the dryer plays a big role
in good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Use Automatic cycles for Better Fabric Care and Energy Savings
Use the Automatic Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles,
drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer
shuts off when the load reaches the selected dryness. The dryer will default to Normal Dryness Level to give you optimal dryness
for your load and save energy. With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling,
and static due to over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the
drying rack.
4
Dry Linen Capacity
10,5 kg (23 lb)
IEC Capacity
8,2 kg (18 lb)
Sound Level:
Lpa < 70 dB(A) (Kpa: +/- 2,5 dB(A))
Maintain good air flow by:
Cleaning your lint screen before each load.
n
Replace plastic or foil vent material with 102 mm (4")
n
diameter heavy, rigid vent material.
Use the shortest length of vent possible.
n
Use no more than four 90° elbows in a vent system;
n
each bend and curve reduces air flow.
Good
Remove lint and debris from the exhaust hood.
n
Remove lint from the entire length of the vent system at
n
least every 2 years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for final product check.
Clear away items from the front the dryer.
n
102 mm
(4")
Better