Whirlpool 3LWED5500 Gebruiks- en onderhoudshandleiding - Pagina 6

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool 3LWED5500. Whirlpool 3LWED5500 48 pagina's.

Pagina afdrukken

CYCLE GUIDE — AUTOMATIC CYCLES

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

AUTOMATIC DRY – Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.

Depending on model, temperature may be selected on cycle knob or be a separate control.

Items to dry:

Jeans, heavy work clothes, towels

Work clothes, medium weight fabrics,

sheets

Casual, shirts, pants, lightweight items,

synthetics, delicates, athletic wear

NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you

like, select Less Dry next time you dry a similar load.

CYCLE GUIDE — TIMED DRY

Not all cycles and settings are available on all models.

TIMED DRY – Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle

knob or be a separate control.

Items to dry:

Any load

Rubber, plastic, heat

sensitive fabrics

COOL DOWN – This step is added to any cycle that uses heat. The load is cooled slowly to reduce wrinkling and make it easier to

handle.

Setting the Drying Temperature

If your dryer has multiple heat settings:

A High heat setting may be used for drying heavyweight items

such as towels and work clothes.

A Low to Medium heat setting may be used for drying

medium-weight items such as sheets, blouses, dresses,

underwear, permanent press fabrics, and some knits.

Cycle:

Drying

Temperature:

More Dry

High

Normal Dry

Medium

Less Dry

Low

Drying

Cycle:

Temperature:

Timed Dry

Any

Air Dry

Timed Dry

Available

Options:

Gives the best drying in the shortest time.

Drying time varies based on fabric type,

load size, and dryness setting.

Select a drying temperature based on

Wrinkle Shield

the fabrics in your load. If you are unsure

Cycle Signal

of the temperature to select for a load,

select the lower setting rather than the

higher setting.

Available

Options:

Dries items to a damp level for items that

do not require an entire drying cycle.

Select a drying temperature based on

the fabrics in your load. If you are unsure

Temp

of the temperature to select for a load,

Wrinkle Shield

select the lower setting rather than the

Time Adjustment

higher setting.

Cycle Signal

Use a no heat (air dry) setting for foam,

rubber, plastic, or heat-sensitive fabrics.

Use a no heat (air dry) setting for foam, rubber, plastic,

or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures

for various loads, refer to the care label directions.

Cycle Details: