Whirlpool 30 " Eye-Level Gas Range Handleiding voor installatie-instructies - Pagina 8

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Whirlpool 30 " Eye-Level Gas Range. Whirlpool 30 " Eye-Level Gas Range 32 pagina's. Freestanding gas range with self-cleaning oven
Ook voor Whirlpool 30 " Eye-Level Gas Range: Installatie-instructies en gebruiks- en onderhoudshandleiding (32 pagina's), Handleiding voor installatie-instructies (11 pagina's), Installatie-instructies en gebruiks- en onderhoudshandleiding (28 pagina's), Handleiding voor installatie-instructies (11 pagina's), Installatie-instructies (5 pagina's), Handleiding voor installatie-instructies (28 pagina's), Handleiding voor installatie-instructies (48 pagina's), Handleiding voor installatie-instructies (12 pagina's), Installatie-instructies (5 pagina's), Handleiding voor installatie-instructies (7 pagina's), Installatiehandleiding (7 pagina's), Handleiding voor installatie-instructies (7 pagina's), Installatie-instructies (5 pagina's), Handleiding voor installatie-instructies (7 pagina's), Handleiding voor installatie-instructies (10 pagina's)

Whirlpool 30
Cutout Height is between 26¹⁵⁄₁₆" (68.4 cm) and 27¹¹⁄₁₆"
(70.3 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Remove the foot from the right front spacer by removing the
#8-18 x ³⁄₈" screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. In the same manner, remove the feet on the right rear, left
front, and left rear of the oven.
4. Using 2 or more people, place the oven in its upright position.
5. Go to the "Make Electrical Connection" section.
8
A
B
C
³⁄₈
" screw
Cutout Height is between 28¹¹⁄₁₆" (72.8 cm) and 29⁷⁄₁₆"
(74.8 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Remove the foot from the right front spacer by removing the
#8-18 x ³⁄₈" screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. Rotate the foot 90° so the short side of the foot is positioned
toward the top of the oven.
4. Reinstall the foot to the spacer using the #8-18 x ³⁄₈" screw
previously removed.
5. In the same manner, remove, rotate and reinstall the feet on
the right rear, left front, and left rear of the oven.
A
B
C
³⁄₈
" screw