Xerox 82 Series Gebruikershandleiding - Pagina 29

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 82 Series. Xerox 82 Series 44 pagina's. Wide format printer
Ook voor Xerox 82 Series: Hints en tips handleiding (8 pagina's)

Pagina afdrukken
Xerox 82 Series Gebruikershandleiding
Use the 2 screws (1) in the tension bar bracket to adjust the tension system. Referencing the
Step 3 :
figures below Line 1 is drawn in Position 1 and Line 2 in drawn in Position 2.
Tool : Hexagon wrench 3 mm
IF Line 2 lays...
BEFORE line 1 (Case A on image above)
BEHIND line 1 (Case B on image above)
Caution
•
Make sure to turn both adjustment screws an equal amount of turns.
Check the calibration again and repeat the adjustment until the lines overlap each other.
Step 4 :
REAR
1 = Adjustment screws
REAR
THEN turn the adjustment screws as follows :
3-15