Xerox 82 Series Kullanıcı Kılavuzu - Sayfa 29

Yazıcı Xerox 82 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox 82 Series 44 sayfaları. Wide format printer
Ayrıca Xerox 82 Series için: İpuçları ve Tavsiyeler Kılavuzu (8 sayfalar)

Sayfayı Yazdır
Xerox 82 Series Kullanıcı Kılavuzu
Use the 2 screws (1) in the tension bar bracket to adjust the tension system. Referencing the
Step 3 :
figures below Line 1 is drawn in Position 1 and Line 2 in drawn in Position 2.
Tool : Hexagon wrench 3 mm
IF Line 2 lays...
BEFORE line 1 (Case A on image above)
BEHIND line 1 (Case B on image above)
Caution
•
Make sure to turn both adjustment screws an equal amount of turns.
Check the calibration again and repeat the adjustment until the lines overlap each other.
Step 4 :
REAR
1 = Adjustment screws
REAR
THEN turn the adjustment screws as follows :
3-15