Xerox Phaser II DX Instructieblad - Pagina 17

Blader online of download pdf Instructieblad voor {categorie_naam} Xerox Phaser II DX. Xerox Phaser II DX 25 pagina's. 4-mbyte ram simm installation

Phaser II SX/DX (bolt-down style image processor board)

Power down the printer. Do not unplug the printer; this preserves a

ground path to dissipate static charges. Disconnect the host interface

cables.

Remove the top panel. Three of the screws securing the top panel are

at the rear of the printer. Open the top cover to access the three other

screws located on the front underside of the top cover. (Be careful

lifting the cabinet top; the front panel cables are still attached.)

Disconnect the front panel LED connector. For DX printers,

disconnect the front panel LCD connector.

4-Mbyte RAM SIMM Installation — (4690F4M)

LED

LCD

8199-42