Xerox Phaser II DX Instructieblad - Pagina 18

Blader online of download pdf Instructieblad voor {categorie_naam} Xerox Phaser II DX. Xerox Phaser II DX 25 pagina's. 4-mbyte ram simm installation

4-Mbyte RAM SIMM Installation — (4690F4M)

Remove the two screws securing the front of the EMI shield. Tilt the

shield up and remove it.

Locate the connectors labeled SIMM #1, #2, and #3 on the image

processor board. (For the Phaser II DX printer, a memory module is

already installed in connector SIMM #1.)

Note

Install memory modules in the order #1, then #2, and then #3.

31113-13