Xerox WORKCENTRE 7435 Aanvullende handleiding - Pagina 17

Blader online of download pdf Aanvullende handleiding voor {categorie_naam} Xerox WORKCENTRE 7435. Xerox WORKCENTRE 7435 49 pagina's. Security function
Ook voor Xerox WORKCENTRE 7435: Referentiehandleiding (28 pagina's), Brochure & specificaties (8 pagina's), Specificaties (15 pagina's), Handleiding voor beoordelaars (32 pagina's), Specificaties (14 pagina's), Software-upgrade (2 pagina's), Snelstarthandleiding (7 pagina's)

Pagina afdrukken
Xerox WORKCENTRE 7435 Aanvullende handleiding

Set IPSec

Note: Before setting [Digital Signature] for [IKE Authentication Method], you will have to import an IPSec
certificate according to same procedure as "Configuring Machine Certificates" (3.4).
1.
Click [+] on the left of the [Security] folder on the [Properties] screen.
2.
Click [IPSec].
3.
Enable the [Protocol] by placing a check mark in the [Enabled] box.
Choose [Pre-Shared Key] setting (4 - 5) or [Digital Signature] setting (6 -11).
4.
Select [Pre-Shared Key] for IKE Authentication Method. This is to use the Shared Secret (between this device
and remote computers also possessing the secret).
5.
Enter a Pre-Shared Key in the [Shared Key] and [Verify Shared Key] box.
Please set the IPSec address successively.
6.
Click [Certificate Management] in the [Security] folder.
7.
Select [IPSec] for Certificate Purpose.
8.
Click the [Display the list] button, and check a desirable Certificate.
9.
Click the [Certificate Details] button.
10. Click the [Use this certificate] button.
11. On the [IPSec] screen, Select [Digital Signature] for IKE Authentication Method.
Please set the IPSec address successively.

Set IPSec Address

12. Enter the IP Address in the [Specify Destination IPv4 Address] box on the [IPSec] screen.
13. Enter the IP Address in the [Specify Destination Ipv6 Address] box.
14. Select [Enabled] or [Disabled] from the [Communicate with Non-IPSec Device] dropdown list.
15. Click the [Apply] button.
16. Click the [Reboot Machine] button.
17