Xerox WORKCENTRE 7435 Додатковий посібник - Сторінка 17

Переглянути онлайн або завантажити pdf Додатковий посібник для Принтер Xerox WORKCENTRE 7435. Xerox WORKCENTRE 7435 49 сторінок. Security function
Також для Xerox WORKCENTRE 7435: Довідковий посібник (28 сторінок), Брошура та технічні характеристики (8 сторінок), Технічні характеристики (15 сторінок), Посібник для оцінювачів (32 сторінок), Технічні характеристики (14 сторінок), Оновлення програмного забезпечення (2 сторінок), Посібник із швидкого старту (7 сторінок)

Xerox WORKCENTRE 7435 Додатковий посібник

Set IPSec

Note: Before setting [Digital Signature] for [IKE Authentication Method], you will have to import an IPSec
certificate according to same procedure as "Configuring Machine Certificates" (3.4).
1.
Click [+] on the left of the [Security] folder on the [Properties] screen.
2.
Click [IPSec].
3.
Enable the [Protocol] by placing a check mark in the [Enabled] box.
Choose [Pre-Shared Key] setting (4 - 5) or [Digital Signature] setting (6 -11).
4.
Select [Pre-Shared Key] for IKE Authentication Method. This is to use the Shared Secret (between this device
and remote computers also possessing the secret).
5.
Enter a Pre-Shared Key in the [Shared Key] and [Verify Shared Key] box.
Please set the IPSec address successively.
6.
Click [Certificate Management] in the [Security] folder.
7.
Select [IPSec] for Certificate Purpose.
8.
Click the [Display the list] button, and check a desirable Certificate.
9.
Click the [Certificate Details] button.
10. Click the [Use this certificate] button.
11. On the [IPSec] screen, Select [Digital Signature] for IKE Authentication Method.
Please set the IPSec address successively.

Set IPSec Address

12. Enter the IP Address in the [Specify Destination IPv4 Address] box on the [IPSec] screen.
13. Enter the IP Address in the [Specify Destination Ipv6 Address] box.
14. Select [Enabled] or [Disabled] from the [Communicate with Non-IPSec Device] dropdown list.
15. Click the [Apply] button.
16. Click the [Reboot Machine] button.
17