Direct power BH26S3 Veiligheids- en bedieningshandleiding - Pagina 13

Blader online of download pdf Veiligheids- en bedieningshandleiding voor {categorie_naam} Direct power BH26S3. Direct power BH26S3 17 pagina's. 5kg sds plus rotary hammer drill

Pagina afdrukken

PLUG REPLACEMENT

The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug
follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured blue must be connected
to the terminal that is marked with the letter N.The
wire that is coloured brown must be connected
to the terminal that is marked with the letter L.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 13 AMP fuse must be fitted.
BLUE
N (NEUTRAL)
OUTER
SLEEVE
5kg SDS Plus Rotary Hammer Drill BH26S3
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP