Xerox Phaser 750DX Servicehandleiding - Pagina 23

Blader online of download pdf Servicehandleiding voor {categorie_naam} Xerox Phaser 750DX. Xerox Phaser 750DX 40 pagina's. Digital color printer / copier
Ook voor Xerox Phaser 750DX: Specificaties (2 pagina's), Brochure & specificaties (4 pagina's), Referentiehandleiding (8 pagina's), Handmatig (9 pagina's)

Pagina afdrukken
Xerox Phaser 750DX Servicehandleiding
Status
Code
08-165
The control logic sensed a timing problem from the TC (Transfer Corotron) Jam Sensor.
Initial action:
Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.
Clean the TC (Transfer Corotron) Jam Sensor.
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Check that there is no paper tacked to the Drum.
If the problem still exists:
Place a service call.
08-167
The control logic sensed a timing problem from the Misstrip Sensor On Check.
Initial action:
Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.
Clean the TC (Transfer Corotron) Jam Sensor.
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Check for excessive wear, damage or proper installation of the Stripper Finger.
Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-23
Fault Code Procedures