Xerox Phaser 750DX Посібник з експлуатації - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для принтерів Xerox Phaser 750DX. Xerox Phaser 750DX 40 сторінок. Digital color printer / copier
Також для Xerox Phaser 750DX: Технічні характеристики (2 сторінок), Брошура та технічні характеристики (4 сторінок), Довідковий посібник (8 сторінок), Посібник (9 сторінок)

Status

Code

08-165

The control logic sensed a timing problem from the TC (Transfer Corotron) Jam Sensor.

Initial action:

Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.

Clean the TC (Transfer Corotron) Jam Sensor.

Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth

(water) (REP 5.22) (REP 5.24).

Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).

Check that there is no paper tacked to the Drum.

If the problem still exists:

Place a service call.

08-167

The control logic sensed a timing problem from the Misstrip Sensor On Check.

Initial action:

Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.

Clean the TC (Transfer Corotron) Jam Sensor.

Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth

(water) (REP 5.22) (REP 5.24).

Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).

Check for excessive wear, damage or proper installation of the Stripper Finger.

Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17).

If the problem still exists:

Place a service call.

5750 DocuCare Service Manual

Description/Direction

5/98

2-23

Fault Code Procedures