Xerox Phaser EX7750 Snelstarthandleiding - Pagina 13
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Xerox Phaser EX7750. Xerox Phaser EX7750 28 pagina's. Phaser with efi fiery network color server
Ook voor Xerox Phaser EX7750: Gedetailleerde specificaties (4 pagina's), Installatiehandleiding (2 pagina's)
Pagina afdrukken
5 Preparing to print
UNIX (TCP/IP) workstation
IPX (Novell) network
Other Network Requirements
• Standard TCP/IP connectivity (for example, RedHat Linux version 7.2)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
• Novell server: Novell NetWare software version 5.x
• Bindery
• NDPS gateway in NetWare 5.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types
Preparing to print
To set up your EX7750, you must perform the following tasks:
• Unpack the EX7750 and the printer
• Prepare the printer and configure printer network settings
• Connect the EX7750 to the printer and a functioning network
• Print EX7750 test pages to verify the connection
• Configure the network server
• Set up the EX7750 from the Control Panel or from the Fiery Advanced Controller
Interface (FACI)
• Prepare client workstations for printing
An explanation of each task follows. For some tasks additional information is provided
in the referenced documentation.