Xerox Phaser EX7750 Hızlı Başlangıç Kılavuzu - Sayfa 13
Yazıcı Aksesuarları Xerox Phaser EX7750 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox Phaser EX7750 28 sayfaları. Phaser with efi fiery network color server
Ayrıca Xerox Phaser EX7750 için: Detaylı Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
5 Preparing to print
UNIX (TCP/IP) workstation
IPX (Novell) network
Other Network Requirements
• Standard TCP/IP connectivity (for example, RedHat Linux version 7.2)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
• Novell server: Novell NetWare software version 5.x
• Bindery
• NDPS gateway in NetWare 5.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types
Preparing to print
To set up your EX7750, you must perform the following tasks:
• Unpack the EX7750 and the printer
• Prepare the printer and configure printer network settings
• Connect the EX7750 to the printer and a functioning network
• Print EX7750 test pages to verify the connection
• Configure the network server
• Set up the EX7750 from the Control Panel or from the Fiery Advanced Controller
Interface (FACI)
• Prepare client workstations for printing
An explanation of each task follows. For some tasks additional information is provided
in the referenced documentation.