Xerox Phaser 6100DN Handmatig - Pagina 18

Blader online of download pdf Handmatig voor {categorie_naam} Xerox Phaser 6100DN. Xerox Phaser 6100DN 34 pagina's. Disk overwrite installation and usage
Ook voor Xerox Phaser 6100DN: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

If Enhanced RBS is in effect, DocuSP RIPs the job to

determine the resourced defined within the job data

before scheduling the job. If, after RIPping the job, the

controller determines that the job requires unavailable

resources, the job is marked Ineligible and a message

is generated detailing which resources are currently

unavailable. If a job specifies a greater quantity of an

available media than is present on a system, it prints

until the system runs out of that media; then the

operator is prompted to add the required media.

Additional PCL Paper Sources

In DocuSP 4.2, the common controller is extended to

support 21 more paper sources for PCL. Under

DocuSP 4.1, the PCL decomposer provided a total of 6

PCL paper sources, which does not meet the

capabilities of certain systems; for example, the Nuvera

product may have up to 12 physical feeds by allowing

customers to add external paper feeder modules. With

DocuSP 4.2, customers with systems that have more

than 6 trays can map a unique PCL paper source to

each of their trays.

Instructions for programming PCL paper sources are

included in the DocuSP Online Help.

DocuSP 3.8 and 4.0 to 4.1 Differences Document