Xerox Phaser 6100DN Aan de slag handleiding - Pagina 22

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox Phaser 6100DN. Xerox Phaser 6100DN 34 pagina's. Disk overwrite installation and usage
Ook voor Xerox Phaser 6100DN: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

Pagina afdrukken
Xerox Phaser 6100DN Aan de slag handleiding
18
Caveat
PPML resource location is not restored in
Preferences menu after a Configuration
Restore. You must reenter the location
manually.
The NetWare and AppleTalk Gateway
settings are not restored in the UI after a
Configuration Restore. You must reset the
gateway manually.
Data Overwrite aborts due to insufficient
storage space.
Avoidance: Backup saved jobs and/or
resources to a network repository. When Data
Overwrite is run, be sure to select [Overwrite
Saved Jobs and Resources]. When the Data
Overwrite is complete, restore the saved jobs
and resources from the network.
The Plex FAB summary display may not
refresh.
Solution: Select the FAB. The values will
display on the FAB.
If COLLATE=NO is set in the JDE, the job
does not offset as expected. Check the job
output.
A job programmed with back covers and a
different stock for the covers prints with the
back covers on the stock of the main body of
the job.
The Add to tray button is disabled in the Stock
Properties dialog for the stocks MAIN, AUX,
and AUTO. Use the Add to tray button in the
Stock Library right mouse menu instead.
After a DocuSP restart, selecting Setup,
SSL/TLS causes the window to not be closed
using the mouse. Close the window using the
keyboard Tab button.
The Job ID for an online job is not displayed
on the DocuSP UI.
The system is in power saver mode and does
not automatically exit power saver mode
when a job is submitted. Manually exit power
saver mode. Setting the system power saver
mode to a longer time or disabling the power
saver can prevent the problem if desired.
Applicable printer product
All
All
All
All
All monochrome printers
All monochrome printers.
All monochrome printers
All monochrome printers
All monochrome printers
All monochrome printers