Xerox Phaser 6100DN Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox Phaser 6100DN. Xerox Phaser 6100DN 32 pagina's. Disk overwrite installation and usage
Ook voor Xerox Phaser 6100DN: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

NOTE: 600 dpi PCL fonts must not be used with a 300 dpi queue

or with any 300 dpi resources. The resolution mismatch causes

characters to be one dot further apart than is nominal. While this

spacing meets industry standards, a high reject rate can result if

the adjacent field spacing does not compensate for this error.

You can use the PCL Unit of Measure command to set the PCL

Unit to 600 (for example, <ESC>&u600D). Alternatively, you can

override the resolution to 600 dpi in the queue. Refer to "Setting

the font resolution," later in this chapter, for information on setting

the resolution in the queue.

MICR User Guide